KV2 Audio solutions thrive at Bregenz Festival 2023

Photo: Bregenz Festival/ Karl Forster

This year’s production at the Bregenz Festival was Puccini’s Madame Butterfly. KV2 Audio solutions made up the core of the system serving the Seebühne and its auditorium.

Clemens Wannemacher explained: “We have been using a point-source based system for many years now as we found it was the most efficient way to handle the various constraints of working on an outdoor production with a live orchestra and a complex set. I’d had my eye on KV2 since 2019 when I was working on another lake stage in Mörbisch am See and was looking to upgrade the front fills and main PA. Martin Lukesch, head of sound at the Volksoper Opera in Vienna mentioned that I should listen to KV2, so we organised a shoot-out amongst several brands. That’s when I heard KV2’s ESR212 and ESR215 for the first time. As luck would have it, Alwin Bösch, who has been working with Bregenz for over 28 years and is now my deputy head of sound, was also at the shootout. We were both impressed by what we heard that day. When I started with Bregenz in 2020 and was looking into upgrading our loudspeaker setup, both Alwin and I immediately settled on the ESR212. We loved the sound, even more than the ESR215, and we also loved the fact that you can rotate the horn in the 212. That comes in very handy as we have to hide the speakers in the set, and by rotating the horn we can use it horizontally which makes it very versatile.”

The loudspeaker setup has over 40 loudspeakers from four different brands being hidden in the stage alone including VHD1.21 and VHD2.16subs from KV2 and three horizontally orientated ESR212s. They join a mix of other loudspeakers from Kling & Freitag, Adamson and JBL.

“The stage has ‘holes’ with small platforms behind them that house the loudspeakers,” described Wannemacher. “The holes are covered with a metal grid, that is (partially) covered with plaster and then painted. There are no dedicated monitor-loudspeakers for the singers. They are effectively standing in front of the PA, so they pretty much hear what the audience hears.”

Loudspeakers are mounted on a series of poles surrounding the listening zone. Four large poles next to the set house four levels of loudspeakers including two KV2 ESR212s in the middle–which are supplemented by Kling & Freitag Spectra 212s top and bottom. Smaller poles surround the rest of the listening area equipped with three levels of K&F Spectra 212 and CA1001CX (along each side) and two levels of Adamson P12 (across the rear). There are also several K&F LINUS loudspeakers placed beneath the seats in the middle of the audience zone as well as some JBL subs.

“There are a few reasons why we ended up with this loudspeaker mosaic,” explained Wannemacher. “Firstly, we try to use speakers that are fit for the different tasks we require. For example, the KV2ESR212s on the poles and inside the set are primarily used for the amplification of the orchestra. Here we need a powerful system with broad coverage, so we can reach a large audience area from the L/C/R positions. However, for the voices, we prefer loudspeakers with much narrower coverage to target specific areas of the audience where we can control the delay.”

“We’ve implemented a 3D sound system using different speakers at different heights, including under-seat speakers for middle stalls. I wanted to mirror this to capture room sound, so we set up microphones in a three-level arrangement to feed the three levels of loudspeakers. When combined with our 3D electronic acoustic room system we achieve a very realistic and pleasant-sounding room that benefits the entire audience. Thanks to an intricate setup of both microphones and loudspeakers, we’ve managed to create an immersive experience for the audience, even in an outdoor environment,” Wannemacher concluded.